Eclipse E2 Sensor Cleaner for Tin Oxide Coated Sensors
enlarge image
|
Home » Photographic Solutions Inc. » Cleaning Fluids
|
£ 8.45 inc VAT
NEW E2 for TIN OXIDE Coated Sensors (59ml Bottle)
E2, the highest purity Tin Oxide sensor cleaner, is now available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no residue, making it the only recommended cleaner for tin oxide coated CCD and CMOS sensor cleaning when used with Sensor Swabs.
"Recommended by Sony for cleaning their DSLR CCD sensor when used with Sensor Swab."
Also suitable for the Canon 400D
ECLIPSE E2 sensor cleaner is the highest purity Tin Oxide coated CCD cleaner available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no residue, making it the only recommended cleaner for Tin Oxide coated CCD and CMOS sensor cleaning when used with Sensor Swabs.
E2 is not recommended for lenses or filters - use original ECLIPSE Optic Cleaner
READ CAREFULLY!
Directions for cleaning Tin Oxide Sensors:
Dispense several drops onto a new Sensor Swab. With one side of the swab, firmly drag it across the sensor. Repeat in opposite direction using the clean side of swab. Discard swab. Repeat if necessary with new swab. Please see out technical section for detailed Sensor Swab instructions.
Note: E2 may be used with conventional
CMOS / CCD sensors.
IMPORTANT: E2 should not be used on other critical optics.
|
|
| Similar products | |||
|---|---|---|---|
|
Eclipse Lens & CCD Cleaner 59ml Bottle (Ref: PS0020) £ 8.45 |
||
